请各位朋友帮忙指点与修改...
我计划年后跳槽,如下是我的简历.有什么地方需要修改或者强化的部分，请各位指点,以便修改...谢谢...
【基本信息】
姓名： 性别： 男 年龄： 26岁
出生日期： 1982-05-26 婚姻状况： 未婚 身高： 170CM
目前所在地： 深圳市 户囗所在地： 荆门市 工作年限： 4年
英语水平： 熟练 英语级别： 四级 计算机： 精通
第二外语： 无 水平：
最高学历： 本科 专业： 电子信息工程;电科学与技术;
目前岗位： 生产/制造类 目前月薪： 保密
目前行业： 通信设备、计算机及其他电子设备制造业 期望月薪： ￥7000以上
意向地区： 深圳市 住房要求： 不要求提供住房
意向行业： 通信设备、计算机及其他电子设备制造业 信息传输、计算机服务和软件业 可到岗时间： 随时到岗
意向岗位： 高级质量工程师/质量经理
【工作经验】
2005/06至今 Quality Supervisor 月薪： 保密
This company is a multinational company. We manufactured the core parts for printer and copycat. I am responsible for QA management and customer complaint and a lot of supplier management and new product process design and fault analysis. I am familiar with statistic process control for its foundation and application. Good capability for SPC control and database usage and data analysis. I am familiar with measurement system analysis (including variables R&R analysis and attributes R&R analysis). I usually went to vendor side to deal with defective incoming material with our supplier and audited their factory and raised their quality management and introduced advanced management method for them for built good co-operate partner and good quality system. I dealt with our customer compliant which come from Europe and America and Asia.(Including HP,Lexmark,Xerox,FujiXerox,Kodak,Flextronics,Foxconn) I am familiar with ISO9001 and TS16949 system requirement and document.
这是一家英国独资企业为惠普，施乐，富士施乐，柯达，利盟，伟创业提供打印机以及复印机核心部件企业。在该公司负责质量工作3年，主要工作如下：
1．协同开发部门开发新供应商，并对新供应商进行审核，评估。是否能成为本公司的合格供应商且纳入合格供应商名册。
Cooperate with Innovation department to search for a new supplier. Calculate and audit for this new supplier see if it could become our approved supplier and then list to our approved supplier list.
2．根据每年供应商审核计划，对负责的供应商进行定期审核。是否满足体系文件要求以及对以往的承诺的改善行动是否执行以及持续改善。
Audit our approved supplier according to the annual planning. If it satisfies system document and permitted for their correction or continue to correct their process.
3．定期组织供应商相关人员对统计手法及现代质量管理方法的培训与探讨（如：DOE，SPC，PFMEA，MSA等），以提高供应商的产品质量。最终达到双赢的目的！
In term of organize our supplier to learn and talk about statistic method and modern management knowledge for quality control for provide the product quality on our supplier. (For example: DOE, SPC, PFMEA, MSA etc) finally reach our target for Double-Win.
4．协助供应商参与其内部制程异常改善，提供自己的看法以及意见供其进行有效性的参考。从而使产品质量得到更好的保证。
Cooperate with our supplier to correct their internal defective process and comment for the process. It will make quality get more advantage.
5．负责生产来料产品的质量计划QP的制定。对特殊材料制定特定的QII检验程序来对其进行检验。
Establish quality plan and quality inspection instruction for incoming product and especial for special product.
6．对于新产品预先拟定PFMEA，召集相关人员进行会议讨论，最终形成FMEA文件并且发行相关部门执行。跟踪相关部门人员进度，定期完成。保证产品先期条件无异常。对新产品的导入，完成PPAP送客户承认.
Complete PFMEA for a new product as first document and then have a meeting with relevant colleague to discuss this FMEA till finish it as final document. Trace relevant colleague to implement active according to this FMEA. Finishing the PPAP for new product and send to customer for approved.
7．依照PFMEA以及图纸要求制定制程产品的质量计划QP和制程产品的QII质量检验说明。督促QA人员必须以QP，QII要求来执行，不得私制标准。
Establish QP and QII for process control according to PFMEA and drawing. Monitor QA to control process and inspect product rely on QP and QII. Don’t permit to change criteria.
8．对新的测量系统进行评估。组织人员完成对新尺寸的测量以及生产中对外观的标准进行有效的评估。确定遗漏率以及风险性达到最底要求。
Evaluate for a new measurement system and organize people to analyze the new measurement system for the dimension and cosmetic make sure to get lowest risk and missing rate.
9．在不影响成本的情况下，对制程进行最优化的改善。使公司获得最大利润，避免质量管控不足以及过分管控。
If don’t influence the cost to change the process get the most benefit and avoid less quality control and more quality control.
10.负责成本出货的质量计划的QP的制定以及外观检验标准的制定。使用包装材料均需开发部门提供可靠性分析报告。
Establish QP and QII for final goods. We need to get a reliability test for packaging before dispatch the goods for customer.
11.负责处理客户投诉，并且对客户投诉立即采取临时性处理措施，调查原因，分析问题。解决根本性原因，杜绝此类不良再次发生。完成8D报告回复客户。
Deal with our customer complaint to correct the problem to investigate the reason to analyze the root cause until solve this problem and complete 8D report. Refuse this problem is occurred again.
12.与客户进行沟通，了解客户需求。力求产品质量高于客户需求的，使客户满意度处于同类性行业前列。
Communicate with our customer for get more information from our customer. Satisfy our customer requirement.
13.拜访客户，了解客户生产对产品要求。从而得到更多信息，使产品的质量满足客户需求。
Visit to customer for know their process requirement for our product ensure to meet our customer requirement.
1.为公司成功导入PFMEA制程过程失效分析,PPAP产品先期决策,MSA测量系统分析等管理工具.
2.PFMEA以及PPAP的主导者,降低生产不良，减少客户抱怨，降低成本提高利润.
3.到达南海，烟台，上海,安徽等地协同供应商解决问题满足我公司产品质量需求.
4 基层人员的管理以及培训，满足现代化生产和品质管理需求.
5.体系维护以及完成外部,内部,客户的定期审核.
.
2004/09至2005/06 Production supervisor 月薪： 保密
This company is a Taiwanese factory. We manufacture the transformer for circuit board. I am responsibility for all department management and basic manager training. As two years experience of process management, make sure me to know that how to train operator and basic manager and how to raise the production efficiency and save man-hour. I arranged the daily production for our process and stat. the defective rate for the process see if it’s out of our requirement. I required our operator need to strengthen their consciousness.
1.根据公司业务人员接单，理性化安排生产，按时完成订单，满足客户交期。
2.对生产不良率过高的工位，进行评估以及分析不良原因。使用相关分析工具进行系统化分析。以降低不良率，提高生产利润。
3.对员工以及基层管理人员的培训提高意识，提高团队合作精神。
4.满足以5S为基础的现场管理，为员工创造一个良好的工作次序和工作环境来提高员工积极性。
5.与相关部门沟通合作，满足公司的管理目标要求.
【工作经历详细介绍】
强烈求知欲望,自信,性格开朗,沟通能力强,具有强劲的团队合作精神!
优秀的领导能力,高尚的职业素质,敢于面对压力和挑战.
行业只是模式,意识才是主体!
【教育背景】
2000/09至2004/07 本科 测控技术与仪器
Four years education let me know what method to procure new knowledge and raise my talent and consciousness.
4年的教育让我学会了如何获得新知识和提高自己的才能和意识的方法.
【技能专长】
Be family with office software and inspection machine as Video system machine and Tensile strength machine and Torque strength machine and so on.
熟悉办公室软件,检测设备如影像测试系统,拉力，扭力测试仪器等!
【基本信息】
姓名： 性别： 男 年龄： 26岁
出生日期： 1982-05-26 婚姻状况： 未婚 身高： 170CM
目前所在地： 深圳市 户囗所在地： 荆门市 工作年限： 4年
英语水平： 熟练 英语级别： 四级 计算机： 精通
第二外语： 无 水平：
最高学历： 本科 专业： 电子信息工程;电科学与技术;
目前岗位： 生产/制造类 目前月薪： 保密
目前行业： 通信设备、计算机及其他电子设备制造业 期望月薪： ￥7000以上
意向地区： 深圳市 住房要求： 不要求提供住房
意向行业： 通信设备、计算机及其他电子设备制造业 信息传输、计算机服务和软件业 可到岗时间： 随时到岗
意向岗位： 高级质量工程师/质量经理
【工作经验】
2005/06至今 Quality Supervisor 月薪： 保密
This company is a multinational company. We manufactured the core parts for printer and copycat. I am responsible for QA management and customer complaint and a lot of supplier management and new product process design and fault analysis. I am familiar with statistic process control for its foundation and application. Good capability for SPC control and database usage and data analysis. I am familiar with measurement system analysis (including variables R&R analysis and attributes R&R analysis). I usually went to vendor side to deal with defective incoming material with our supplier and audited their factory and raised their quality management and introduced advanced management method for them for built good co-operate partner and good quality system. I dealt with our customer compliant which come from Europe and America and Asia.(Including HP,Lexmark,Xerox,FujiXerox,Kodak,Flextronics,Foxconn) I am familiar with ISO9001 and TS16949 system requirement and document.
这是一家英国独资企业为惠普，施乐，富士施乐，柯达，利盟，伟创业提供打印机以及复印机核心部件企业。在该公司负责质量工作3年，主要工作如下：
1．协同开发部门开发新供应商，并对新供应商进行审核，评估。是否能成为本公司的合格供应商且纳入合格供应商名册。
Cooperate with Innovation department to search for a new supplier. Calculate and audit for this new supplier see if it could become our approved supplier and then list to our approved supplier list.
2．根据每年供应商审核计划，对负责的供应商进行定期审核。是否满足体系文件要求以及对以往的承诺的改善行动是否执行以及持续改善。
Audit our approved supplier according to the annual planning. If it satisfies system document and permitted for their correction or continue to correct their process.
3．定期组织供应商相关人员对统计手法及现代质量管理方法的培训与探讨（如：DOE，SPC，PFMEA，MSA等），以提高供应商的产品质量。最终达到双赢的目的！
In term of organize our supplier to learn and talk about statistic method and modern management knowledge for quality control for provide the product quality on our supplier. (For example: DOE, SPC, PFMEA, MSA etc) finally reach our target for Double-Win.
4．协助供应商参与其内部制程异常改善，提供自己的看法以及意见供其进行有效性的参考。从而使产品质量得到更好的保证。
Cooperate with our supplier to correct their internal defective process and comment for the process. It will make quality get more advantage.
5．负责生产来料产品的质量计划QP的制定。对特殊材料制定特定的QII检验程序来对其进行检验。
Establish quality plan and quality inspection instruction for incoming product and especial for special product.
6．对于新产品预先拟定PFMEA，召集相关人员进行会议讨论，最终形成FMEA文件并且发行相关部门执行。跟踪相关部门人员进度，定期完成。保证产品先期条件无异常。对新产品的导入，完成PPAP送客户承认.
Complete PFMEA for a new product as first document and then have a meeting with relevant colleague to discuss this FMEA till finish it as final document. Trace relevant colleague to implement active according to this FMEA. Finishing the PPAP for new product and send to customer for approved.
7．依照PFMEA以及图纸要求制定制程产品的质量计划QP和制程产品的QII质量检验说明。督促QA人员必须以QP，QII要求来执行，不得私制标准。
Establish QP and QII for process control according to PFMEA and drawing. Monitor QA to control process and inspect product rely on QP and QII. Don’t permit to change criteria.
8．对新的测量系统进行评估。组织人员完成对新尺寸的测量以及生产中对外观的标准进行有效的评估。确定遗漏率以及风险性达到最底要求。
Evaluate for a new measurement system and organize people to analyze the new measurement system for the dimension and cosmetic make sure to get lowest risk and missing rate.
9．在不影响成本的情况下，对制程进行最优化的改善。使公司获得最大利润，避免质量管控不足以及过分管控。
If don’t influence the cost to change the process get the most benefit and avoid less quality control and more quality control.
10.负责成本出货的质量计划的QP的制定以及外观检验标准的制定。使用包装材料均需开发部门提供可靠性分析报告。
Establish QP and QII for final goods. We need to get a reliability test for packaging before dispatch the goods for customer.
11.负责处理客户投诉，并且对客户投诉立即采取临时性处理措施，调查原因，分析问题。解决根本性原因，杜绝此类不良再次发生。完成8D报告回复客户。
Deal with our customer complaint to correct the problem to investigate the reason to analyze the root cause until solve this problem and complete 8D report. Refuse this problem is occurred again.
12.与客户进行沟通，了解客户需求。力求产品质量高于客户需求的，使客户满意度处于同类性行业前列。
Communicate with our customer for get more information from our customer. Satisfy our customer requirement.
13.拜访客户，了解客户生产对产品要求。从而得到更多信息，使产品的质量满足客户需求。
Visit to customer for know their process requirement for our product ensure to meet our customer requirement.
1.为公司成功导入PFMEA制程过程失效分析,PPAP产品先期决策,MSA测量系统分析等管理工具.
2.PFMEA以及PPAP的主导者,降低生产不良，减少客户抱怨，降低成本提高利润.
3.到达南海，烟台，上海,安徽等地协同供应商解决问题满足我公司产品质量需求.
4 基层人员的管理以及培训，满足现代化生产和品质管理需求.
5.体系维护以及完成外部,内部,客户的定期审核.
.
2004/09至2005/06 Production supervisor 月薪： 保密
This company is a Taiwanese factory. We manufacture the transformer for circuit board. I am responsibility for all department management and basic manager training. As two years experience of process management, make sure me to know that how to train operator and basic manager and how to raise the production efficiency and save man-hour. I arranged the daily production for our process and stat. the defective rate for the process see if it’s out of our requirement. I required our operator need to strengthen their consciousness.
1.根据公司业务人员接单，理性化安排生产，按时完成订单，满足客户交期。
2.对生产不良率过高的工位，进行评估以及分析不良原因。使用相关分析工具进行系统化分析。以降低不良率，提高生产利润。
3.对员工以及基层管理人员的培训提高意识，提高团队合作精神。
4.满足以5S为基础的现场管理，为员工创造一个良好的工作次序和工作环境来提高员工积极性。
5.与相关部门沟通合作，满足公司的管理目标要求.
【工作经历详细介绍】
强烈求知欲望,自信,性格开朗,沟通能力强,具有强劲的团队合作精神!
优秀的领导能力,高尚的职业素质,敢于面对压力和挑战.
行业只是模式,意识才是主体!
【教育背景】
2000/09至2004/07 本科 测控技术与仪器
Four years education let me know what method to procure new knowledge and raise my talent and consciousness.
4年的教育让我学会了如何获得新知识和提高自己的才能和意识的方法.
【技能专长】
Be family with office software and inspection machine as Video system machine and Tensile strength machine and Torque strength machine and so on.
熟悉办公室软件,检测设备如影像测试系统,拉力，扭力测试仪器等!
没有找到相关结果
已邀请:
RSS Feed
6 个回复
狼小白 (威望:0) -
赞同来自:
再寫一份英文的
兩分訂在一志
不要中英混合,很容易造成視覺混亂
看起來不夠簡潔